Fabrication and Coating

Adhiam Titanium Plate Heat Exchanger Specially Designed & Processed for the purpose of Chemical & Marine Applications. Our Manufacturing unit is capable of fabricating products using high grade exotic metals such as titanium, Nickel, Hastelloy C 276, Monel, Inconel, Incolloy etc., Such as:

  • 1
    Heat Exchanger Vessels
  • 2
    Lined Tanks and Vessels
  • 3
    Jigs and Fixtures, Pumps
  • 4
    Any other products as per client specification/Drawing
  • 5
    Titanium lining of Vessels(per customer Specifications)
  • 6
    Component Fabrication & coating under ASME, BS, TEMA, DIN and other international Standards( as per customer requirements
We can offer to the specific needs with ASME and TEMA specifications.

Customised Systems with Compact Heat Exchangers

Adhiam HE Projects
RDSO- Engine Test bed cooling system

Adhiam offer tailor made turn-key systems and solutions to our customers such as:


MMO Anode

MMO anodes have imperceptibly low wear rates and are dimensionally Stable Anodes as they do not change geometry over time.

The coating recipe consists of an electro catalytic conductive component that catalyzes the reaction to generate current flow, and bulk oxides that prevent corrosion of the substrate material.

Ruthenium Oxide (RuO2)

Ruthenium oxide, which is the cheaper of the two electrocatalysts, should only be used in chlorinated environments (sea water). The catalytic life is significantly reduced when the primary reaction is the evolution of oxygen (fresh water, soil, coke backfill and concrete environments).

Platinum coated Anode

Platinum is noble metal and have high conductivity, chemically stable and highly resistant to Oxidation and corrosion. Due to its high cost, the coating is being done on metal like titanium , tantalum , Niobium. Among these three metals, titanium is less expensive. Depends on the current rating and applications, the metal can be chosen. platinized titanium anodes : recommended operating voltage is 8 V. The corresponding maximum current density output is approximately 1 kA m-2. when operating voltages are relatively high, niobium and tantalum based anodes are generally selected.